[1] Aobo Liu, Yu Qin, Jiabao Dai, Fei Song, Yun Tian, Yufeng Zheng*, Peng Wen*. Fabrication and performance of Zinc-based biodegradable metals: From conventional processes to laser powder bed fusion, Bioactive Materials, DOI: 10.1016/j.bioactmat.2024.07.022
[2] Yu Qin#, Chunhao Yu#, Peng Wang#, Hongtao Yang, Aobo Liu, Shuhan Wang, Zhenquan Shen, Senju Ma, Yongcan Huang*, Binsheng Yu*, Peng Wen*, Yufeng Zheng*.
[3] Shuang Li#, Hongtao Yang#,*, Xinhua Qu# , Yu Qin, Aobo Liu, Guo Bao, He Huang, Chaoyang Sun, Jiabao Dai, Junlong Tan, Jiahui Shi, Yan Guan, Wei Pan, Xuenan Gu, Bo Jia, Peng Wen*, Xiaogang Wang*, Yufeng Zheng*, Multiscale architecture design of 3D printed biodegradable Zn-based porous scaffolds for immunomodulatory osteogenesis. Nature Communications 15 (2024) 3131.
[4] Xuan Wang#, Aobo Liu#, Zhenbao Zhang#, Dazhong Hao, Yijie Liang, Jiabao Dai, Xiang Jin, Huanze Deng, Yantao Zhao*, Peng Wen*, Yanfeng Li*. Additively manufactured Zn-2Mg alloy porous scaffolds with customizable biodegradable performance and enhanced osteogenic ability, Advanced Science, 2024, 11 (5) 2307329
[5] Xiang Jin#, Dongxu Xie#, Zhenbao Zhang#, Aobo Liu, Menglin Wang, Jiabao Dai, Xuan Wang, Huanze Deng, Yijie Liang, Yantao Zhao*, Peng Wen*, Yanfeng Li*. In vitro and in vivo studies on biodegradable Zn porous scaffolds with a drug-loaded coating for the treatment of infected bone defect, Materials Today Bio, 2024, 24: 100885
[6] Bangzhao Yin#, Kun Li*, Wen Chen, Huanjie Huang, Dazhi Liu, Fei Song*, Yun Tian, Peng Wen*. Effect of powder composition on WE43 magnesium alloy fabricated by laser powder bed fusion [J]. Journal of Materials Research and Technology, 2024, 32: 577-588.
[7] Wen Chen#, Bangzhao Yin#, Kun Li*#, Ruobing Liao, Benxiang Li, Huanjie Huang, Yingjie We, Peng Wen*, Bin Jiang, Fusheng Pan. Superstrengthening effect of beyond-solid-solution laser powder bed fused WE43 magnesium alloy triggered by direct aging treatment [J]. Additive Manufacturing, 2024, 89: 104287
[8] BC Liu#, JG Liu#, CX Wang, ZG Wang, CM Wang, YF Zheng*, P Wen*, Y Tian*. High temperature oxidation treated 3D printed anatomical WE43 alloy scaffolds for repairing periarticular bone defects: In vitro and in vivo studies, Bioactive Materials, 2024 (32): 177-189
[9] Haojing Xu, Bo Peng, Jinge Liu, Fei Song*, Yun Tian*, Yufeng Zheng, Peng Wen*. Improved passivation effect of additively manufactured WE43 porous scaffolds treated by high temperature oxidation in pure oxygen atmosphere, Material Letters, 2024, 357: 135713
[10] Bo Peng#, Haojing Xu, Fei Song, Peng Wen*, Yun Tian*, Yufeng Zheng*. Additive manufacturing of porous magnesium alloys for biodegradable orthopedic implants: process, design, and modification, Journal of Materials Science & Technology, 2024, 182: 79-110
[11] Jinge Liu#, Shuyuan Min, Zijun Mao, Mengran Zhou, Bingchuan Liu, Dazhi Liu, Fei Song, Peng Wen*, Yun Tian*, Yufeng Zheng*. Influence of high temperature oxidation on mechanical properties and in vitro biocompatibility of WE43 magnesium alloy fabricated by laser powder bed fusion, Journal of Materials Science & Technology, 2024, 179: 26-39
[12] Bo Peng#, Ye Wei#*, Yu Qin#*, Jiabao Dai, Yue Li, Aobo Liu, Yun Tian, Liuliu Han, Yufeng Zheng, Peng Wen*. Machine learning-enabled constrained multi-objective design of architected materials, Nature Communications, 2023, 14: 6630
[13] Kun Li*#, Wen Chen#, Bangzhao Yin, Chen Ji, Shengwen Bai, Ruobing Liao, Tianbao Yang, Peng Wen*, Bin Jiang, Fusheng Pan. A comparative study on WE43 magnesium alloy fabricated by laser powder bed fusion coupled with deep cryogenic treatment: Evolution in microstructure and mechanical properties, Additive Manufacturing, 2023(77): 103814
[14] Chaoxin Wang#, Shuyuan Min, Jinge Liu, Bingchuan Liu, Bo Peng, Caimei Wang, Xiaolin Ma, Peng Wen*, Yufeng Zheng*, Yun Tian*. Effect of pore geometry on properties of high-temperature oxidized additively manufactured magnesium scaffolds, Journal of Magnesium and Alloys, DOI: 10.1016/j.jma.2023.08.016
[15] Chaoxin Wang#, Jinge Liu#, Shuyuan Min, Yu Liu, Bingchuan Liu, Yuanyu Hu, Z, Zhengguang Wang, Fengbiao Wang, Caimei Wang, Xiaolin Ma, Peng Wen*, Yufeng Zheng*, Yun Tian*. The effect of pore size on the mechanical properties, biodegradation and osteogenic effects of additively manufactured magnesium scaffolds after high temperature oxidation: an in vitro and in vivo study Bioactive Materials, 2023 (28): 537-548
[16] Zhenbao Zhang#, Aobo Liu#, Jiadong Fan#, Menglin Wang, Jiabao Dai, Xiang Jin, Huanze Deng, Xuan Wang, Yijie Liang, Haixia Li, Yantao Zhao*, Peng Wen*, Yanfeng Li*. A drug-loaded composite coating to improve osteogenic and antibacterial properties of Zn–1Mg porous scaffolds as biodegradable bone implants, Bioactive Materials, 2023 (27): 488-504
[17] Aobo Liu#, Yupu Lu#, Jiabao Dai, Peng Wen*, Dandan Xia*, Yufeng Zheng*. Mechanical properties, in vitro biodegradable behavior, biocompatibility and osteogenic ability of additively manufactured Zn-0.8Li-0.1Mg alloy scaffolds, Biomaterials Advances, 2023, 153:213571
[18] BZ Yin#, JG Liu, B Peng, MR Zhou, BC Liu, XL Ma, CM Wang, P Wen*, Y Tian*, YF Zheng*, Influence of layer thickness on formation quality, microstructure, mechanical properties, and corrosion resistance of WE43 magnesium alloy fabricated by laser powder bed fusion, Journal of Magnesium and Alloys, 12(4): 1367-1385
[19] JG Liu#, BZ Yin, F Song, BC Liu, B Peng, P Wen*, Y Tian*, YF Zheng* Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications, Journal of Magnesium and Alloys, 12(3): 940-953
[20] Shuyuan Min#, Chaoxin Wang, Bingchuan Liu, Jinge Liu, Yu Liu, Zehao Jing, Yan Cheng, Peng Wen*, Xing Wang, Yufeng Zheng*, Yun Tian*. The biological properties of 3D-printed degradable magnesium alloy WE43 porous scaffolds via the oxidative heat strategy, International Journal of Bioprinting, 2023, 9(3): 686
[21] Aobo Liu#, Bangzhao Yin, Di Zhang*, Peng Wen*, Microstructure, mechanical and electrochemical properties of wire-arc additively manufactured duplex stainless steel, Science and Technology of Welding and Joining, 2023, 28(4): 268-276
[22] DD Xia#, Y Qin, H Guo, P Wen*, H Lin*, M Voshage, JH Schleifenbaum, Y Cheng, YF Zheng*. Additively manufactured pure zinc porous scaffolds for critical-sized bone defects of rabbit femur, Bioactive Materials, 2023(19): 12-13
[23] Zhengguang Wang#, Bingchuan Liu#, Bangzhao Yin, Yufeng Zheng*, Yun Tian*, Peng Wen*. Comprehensive review of additively manufactured biodegradable magnesium implants for repairing bone defects from biomechanical and biodegradable perspectives, Frontiers in Chemistry, 2022, 10: 1066103
[24] BC Liu#, XC Li, WP Qiu, ZJ Liu, F Zhou, YF Zheng, P Wen*, Y Tian*, Mechanical Distribution and New Bone Regeneration After Implanting 3D Printed Prostheses for Repairing Metaphyseal Bone Defects: A Finite Element Analysis and Prospective Clinical Study, Frontiers in Bioengineering and Biotechnology, 2022, 10(7): 921545
[25] Y Qin#, AB Liu, H Guo, YN Shen, P Wen*, H Lin, DD Xia*, M Voshage, Y Tian, YF Zheng*. Additive manufacturing of Zn-Mg alloy porous scaffolds with enhanced osseointegration: in vitro and in vivo studies, Acta Biomaterialia, 2022(145): 403-415
[26] JG Liu#, BC Liu#, SY Min, BZ Yin, B Peng, ZS Yu, CM Wang, XL Ma, P Wen*, Y Tian*, YF Zheng*. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: process optimization, in vitro and in vivo investigation, Bioactive Materials, 2022 (16): 301-319
[27] Qin Y#, Yang H, Liu A, Dai J, Wen P*, Zheng Y*, Tian Y, Li S, Wang X. Processing optimization, mechanical properties, corrosion behavior and cytocompatibility of additively manufactured Zn-0.7Li biodegradable metals. Acta Biomaterialia, 2022 (142): 388-401
[28] Liu Jinge#, Wen Peng*, Metal vaporization and its influence during laser powder bed fusion process, Materials & Design 2022 (215): 110505
[29] Zhang Di#, Liu Aobo#, Yin, Bangzhao, Wen Peng*, Additive manufacturing of duplex stainless steels-A critical review, Journal of Manufacturing Processes, 2022(73): 496-517
[30] Boce Xue#, Baohua Chang, Shenghua Wang, Runshi Hou, Peng Wen*, Dong Du*, Humping formation and suppression in high-speed laser welding, Materials, 2022(1): 2420
[31] Liu Jinge#, Yin Bangzhao, Sun Zhaorui, Wen Peng*, Zheng Yufeng*, Tian Yun*, Hot cracking in ZK60 magnesium alloy produced by laser powder bed fusion process, Materials Letters, 2021(301): 130283
[32] Zhang, Di#, Wen, Peng*, Yin, Bangzhao, Liu, Aobo, Temperature evolution, phase ratio and corrosion resistance of duplex stainless steels treated by laser surface heat treatment, Journal of Manufacturing Processes, 2021(62): 99-107
[33] Qin, Yu#, Liu, Jinge, Chen, Yanzhe, Wen, Peng*, Zheng, Yufeng*, Tian, Yun, Voshage, Maximilian, Schleifenbaum, Johannes Henrich, Influence of Laser Energy Input and Shielding Gas Flow on Evaporation Fume during Laser Powder Bed Fusion of Zn Metal, Materials, 2021(14): 2677
[34] Y. Qin#, P. Wen*, D. Xia, H. Guo, M. Voshage, L. Jauer, Y. Zheng*, J.H. Schleifenbaum, Y. Tian, Effect of grain structure on the mechanical properties and in vitro corrosion behavior of additively manufactured pure Zn, Additive manufacturing, 2020, 33: 101134
[35] Y. Qin#, P. Wen*, M. Voshage, Y. Chen, P.G. Schückler, L. Jauer, D. Xia, H. Guo, Y. Zheng*, J.H. Schleifenbaum, Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds: Formation quality, microstructure and mechanical properties, Materials & Design, 2019, 181: 107937.
[36] Y. Qin#, P. Wen*, H. Guo, D. Xia, Y. Zheng*, L. Jauer, R. Poprawe, M. Voshage, J.H. Schleifenbaum, Additive manufacturing of biodegradable metals: Current research status and future perspectives, Acta biomaterialia, 2019, 98: 3-22.
[37] P Wen#*, Y Qin, YZ Chen, Voshage M, L Jauer, R Poprawe, JH Schleifenbaum. Laser additive manufacturing of Zn porous scaffolds: shielding gas flow, surface quality and densification, Journal of Materials Science & Technology, 2019, 35: 368-376
[38] Y. Chen#, P. Wen*, M. Voshage L. Jauer, R. Poprawe, J.H. Schleifenbaum, Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality, Journal of Laser Applications, 2019, 31: 022304.
[39] P. Wen#*, D. Yelkenci, J. Chen, B. Chang, D. Du, J. Shan, Numerical analysis of the effect of welding positions on formation quality during laser welding of TC4 titanium alloy parts in aerospace industry, Journal of Laser Applications, 2019, 31: 022308
[40] P Wen#*, Voshage M, L Jauer, YZ Chen, Y Qin, R Poprawe, JH Schleifenbaum. Laser additive manufacturing of Zn metal parts for biodegradable applications: Processing, formation quality and mechanical properties. Materials & Design, 2018, 155: 36-45
[41] P Wen#*, L Jauer, Voshage M, YZ Chen, R Poprawe, JH Schleifenbaum. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants. Journal of Materials Processing Technology, 2018, 258: 128-137
[42] P Wen#*, Y Song. Numerical simulation and process optimization of laser surface treatment on duplex stainless steel, Journal of Laser Applications, 2018, 30: 032504
[43] P Wen#*, G Wang#*, YZ Chen. Effect of laser scanning and powder addition on microstructure and mechanical properties for hot-wire-feed laser additive manufacturing, Journal of Laser Applications, 2017, 29: 022302
[44] C Zhang#, P Wen*, YM Yuan, XJ Fan. Evaluation and Optimal Design of Supersonic Nozzle for Laser-assisted Oxygen Cutting of Thick Steel Sections, International Journal of Advanced Manufacturing Technology, 2016, 86: 1243-1251
[45] C Zhang#, P Wen*, ZH Yao, YM Yuan, XJ Fan. Visualization of flow separation inside cut kerf during laser cutting of thick sections, Journal of Laser Applications, 2016, 28: 022204
[46] P Wen#*, JG Shan, SQ, Zheng, G Wang. Control of wire transfer behaviors in hot wire laser welding, International Journal of Advanced Manufacturing Technology, 2016, 83: 2091-2100
[47] P Wen#*, ZH Feng, SQ Zheng. Formation quality optimization of laser hot wire cladding for repair martensite precipitation hardening stainless steel. Optics and Laser technology, 2015, 65: 180-188
[48] P Wen#*, ZP Cai#*, ZH Feng, G Wang. Microstructure and mechanical properties of hot wire laser clad layers for repair precipitation hardening martensitic stainless steel, Optics and Laser Technology, 2015, 75: 207-213
[49] P Wen#*, YQ.Zhang and WZ.Chen: Quality detection and control during laser cutting progress with coaxial visual monitoring, Journal of Laser Applications, 2012, 24( 3): 032006
[50] K Shinozaki#, P Wen#*, M Yamamoto, K Kadoi, Y Kohno, T Komori. Effect of grain size on solidification cracking susceptibility of type 347 stainless steel during laser welding. Quarterly Journal of the Japan Welding Society, 2011, 29(3): 90-94
[51] P Wen#*, M. Yamamoto, T. Tamura, S. Senda, K. Shinozaki: Study on solidification cracking of laser dissimilar welded joints by using in-situ observation and numerical simulation, Welding in the World, 2010, 54(9-10): R257-R266
[52] YQ. Zhang#, P Wen#*, JG. Shan, YQ.Shuang, WZ.Chen: Evaluation criterion and closed-loop control of penetration status during laser-MIG hybrid welding, Journal of Laser Applications, 2010, 22(3):92-98
[53] P Wen*. The introduction of my experience in Japan as a foreign student. Journal of the Japan Welding Society, 2010, 79(4): 35-37
[54] P Wen#*, K. Shinozaki, M. Yamamoto, T. Tamura and N. Nemoto: In-situ observation of solidification cracking of laser dissimilar welded joints, Quarterly Journal of Japan Welding Society, 2009(2): 134-138
[55] P Wen#*, K. Shinozaki, M. Yamamoto, T. Tamura and N. Nemoto: Prediction of solidification cracking by in-situ observation and 3d fem-analysis, Quarterly Journal of the Japan Welding Society, 2009(2): 139-143
[56] K. Shinozaki#*, M. Yamamoto#*, P. Wen#* and T. Tamura: Prediction of occurrence of solidification cracking in weld metal, Journal of the JWS, 2008, 77(4), 20-25
[57] P Wen*, Zheng Shiqing, Feng Zhenhua. Prediction of wire transfer behaviors in laser hot wire welding. China welding, 2014, 23(1):12-18
[58] 尹浜兆,刘金戈,刘冰川,彭勃,温鹏,田耘,郑玉峰,王彩梅,马小林,裴浩同, WE43镁合金激光粉末床熔融工艺研究, 中国激光, 2022, 14(49): 1402107
[59] 张迪,赵琳,刘奥博, 温鹏, 激光能量对激光焊接接头熔化形状、气孔和微观组织的影响及其调控方法, 中国激光, 2021, 48: 1502005
[60] 郑玉峰,夏丹丹,谌雨农,刘云松,徐钰倩,温鹏,田耘,赖毓霄, 增造可降解金属医用植入物, 金属学报, 57(2021): 1499-1520
[61] 尹浜兆,秦瑜,温鹏,郑玉峰,田耘, 激光粉末床熔融制备金属骨植入物, 中国激光, 2020, 47(11): 8-25.
[62] 陈俊宏, 温鹏, 常保华, 单际国, 程昊.钛合金清洗及对激光焊接气孔的影响.中国机械工程, 2020, 31(6): 1-5
[63] 东峰, 陈俊宏, 温鹏, 常保华, 单际国. 钛合金激光立焊烧穿和气孔缺陷及其数值模拟, 焊接学报, 2019, 40(1): 10-14
[64] 温鹏, R Poprawe, 赵海燕. 研究生课程混合式教学新实践-基于翻转课堂和远程教学的中德联合授课, 清华大学教育研究, 2019, 40(12): 15-18
[65] 温鹏, 邬瑞峰, 王秀义, 安吉, 王小龙, 张炎. 不锈钢车体搭接接头激光非熔透焊接工艺及其拉剪性能, 中国机械工程, 2017, 28 (11) :1355-1361
[66] 温鹏,郑世卿,单际国,冯振华. 激光热丝焊电阻热控制及送丝参数优化. 焊接学报, 2015, 36(9): 17-20
[67] 温鹏,冯振华,郑世卿. 激光热丝焊表面修复成形质量分析和控制. 焊接学报, 2015, 36(5): 21-24
[68] 郑世卿,温鹏,单际国. 激光热丝焊接过程焊丝过渡行为及其稳定性的研究. 中国激光, 2014, 41(4): 0403008
[69] 温鹏,王威,谭向虎,单际国,王旭友, 林尚扬. 激光能量和辅助气体对切割能力影响的数值模拟. 焊接学报, 2013, 34(4): 57-60
[70] 郑世卿,温鹏,单际国. 激光热丝焊焊缝熔合比和焊缝深度方向的微观成分均匀性. 焊接学报, 2012, 33(12): 45-48
[71] 郑世卿,温鹏,单际国. 球铁光纤激光-MIG复合焊接头的裂纹倾向与力学性能. 焊接学报, 2012, 33(8): 29-32
[72] 温鹏,荻崎贤二,山本元道. 奥氏体不锈钢激光焊接过程中残留液体金属的在线观察. 焊接学报, 2012, 33(3): 53-56
[73] 温鹏,单际国,邱志雄,张斌.大功率机车车轮材料微观组织对对性能的影响. 金属热处理, 2012, 37(5): 6-10
[74] 温鹏,单际国,曹志晓,张斌. 大功率机车车轮材料滑动摩擦磨损的试验研究, 钢铁研究学报, 2011, 23(11): 41-46
[75] 温鹏,获崎贤二,山本元道. 环形结构激光焊接凝固热裂纹的实验研究和数值模拟. 金属学报, 2011, 47(10): 1241-1245
[76] 温鹏,郑世卿,荻崎贤二,山本元道. 填充热丝激光窄间隙焊接的实验研究. 中国激光, 2011, 38(11): 1103004(1-6)
[77] 温鹏,获崎贤二,山本元道. 激光焊接过程中残留液体金属的高速高倍在线观察. 金属学报, 2011, 47(3): 305-310
[78] 温鹏,荻崎贤二,山本元道. 基于在线观察的激光焊接凝固热裂纹敏感性研究. 中国激光, 2011, 38(6): 0603005(1-6)
[79] 温鹏, 张旭东, 陈武柱, Henry Peng: 薄板激光焊时失稳变形及其控制, 焊接学报, 2006年, 27(9)
专利
[1] 温鹏 秦瑜 一种仿制生物骨刚度的多孔骨植入物结构设计方法，中国发明专利，ZL 2021106942213
[2] 温鹏 田耘 刘奥博 刘冰川一种复合材料和结构功能的金属骨植入物的制造方法，中国发明专利，ZL2021106927868
[3] 温鹏 尹浜兆 一种高精度可降解金属多孔支架激光粉末床熔融制造方法，中国发明专利，ZL202110692757.1
[4] 温鹏 秦瑜 代家宝 一种基于机器学习的可降解金属骨植入物设计方法，中国发明专利，ZL202110694232.1
[5] 温鹏 刘金戈 基于选区激光熔化技术制备功能梯度材料的方法，中国发明专利， ZL202010856021.9
[6] 温鹏 刘金戈 一种基于多重扫描熔化的激光粉末床熔融增材制造方法，中国发明专利，ZL202110692790.4
[7] 温鹏 郑世卿 单际国 激光热丝焊焊丝温度测量方法，中国发明专利，ZL201310508669.7
[8] 温鹏 郑世卿 单际国 激光热丝焊焊丝过渡稳定性控制方法，中国发明专利，ZL201310507934.x
